Console Display - JLL S400 Manual Book

Console display

Time
Speed
Set up parameter
The treadmill should be completely
stopped.
1. Press
numbers
will become ZERO, except WEIGHT.
2. Press SET button several times to
change different settings and the
number in the display area will flick.
• 2 times to change TIME.
• 3 times to change SPEED.
• 4 times to change DISTANCE.
• 5 times to change HEART RATE.
• 6 times to change INCLINE.
3. Press FAST or SLOW button to
rectify the numbers.
4. Press START button to start or STOP
button to cancel.
Treadmill in STANDBY mode and all data
in the window are ZERO.
1. Press SET to show set data.
2. Press SET again and hold the
button for 8 - 10 seconds to show
the total distance.
14
www.jllfitness.co.uk
SET button and all
in the display area
Total
distance shown
Pause/Stop
During the treadmill workout, press
the STOP button once for stopping the
treadmill and keep the data recorded so
far. If you press the STOP button again,
the
all the digits on the display area will
return to ZERO.
Set up incline
Before or during the treadmill workout,
press the UP/DOWN incline button on
the console or using the incline buttons
on the handrail.
Quick easy speed
On the right hand side of the screen,
there are 4 buttons of speed. Press
START and then any of them to change
automatically the speed.
5: 5 km/h
8: 8 km/h
Exit set up mode
Press the STOP button to exit
Setup options.
www.jllelectronics.co.uk
Setup
Distance
Heart Rate
Calories / Weight
Incline