Sanyo PLC-WTC500L Service Manual page 36

Optical Parts Disassembly
1-2. LCD Panel/Prism Assy disassembly
1. Remove 1 screw-A (M2x4) each on the stopper and remove the stopper-B
and C, and pull the Polarized Glass-Out and Pre-Polarized Glass upward.
There is a single-glass type or a double-glass type for
the Polarized Glass (G). When replacing it, must be
used with the same type of the Polarized Glass (G). It
is no compatibility between a single-glass type and a
double-glass type.
Stopper-B
(Blue)
Pre-Polarized glass (B)
Polarized glass-out (B)
A
-36-
the double-glass type structure
Black Marker
the single-glass type structure
Black Marker
A
Stopper-C
(Green)
Polarized glass (G)
Polarized glass-out (G)
A
Stopper-C
(red)
Black Marker
Glass cover
Spacer
Polarized glass
Polarized glass-out (R)
Pre-Polarized glass (R)