Channel Selection - Rosen PR-UN1370-US Owner's Manual

Channel Selection

1. Touch the [SAT] button on the SAT Menu display to enter channel list preview mode.
2. Select the channel with the [ ] or [ ]. Only channels that can be received are selected.
The receiver seeks the next available channel below or above the current channel.
3.Press the [ ] or [ ] button long to switch channel
Presets Channel Selection with the channel number
A total of 6 satellite radio stations can be stored in the receiver's memory. This allows you to store
your favorite satellite radio stations in the memory for later recall.
Preset Store
1. The preset list is blank by default.
2. If a channel is your favorite, touch and hold the corresponding preset key for more than 2
seconds to save the current channel.
3. Touch and hold a preset key which has stored a channel for more than 2 seconds to save other
channel.
Change the preset list
There are 3 preset lists in SAT mode. This allows you to store different channels. Touch the [ ]
key to change other preset list.
Receiving Stations by Category
Satellite Radio allows you to select broadcast channel category (contents).
1. Touch the Category Scan button to select broadcast channel category.
2. Press and flick the Next Channel Button or Previous Channel Button to get your desired
channel.