Table of Contents
Advertisement
If on SPS, [
] will go to lower SPS or MPS (SPS→MPS→Seek Freq). If not acquired, or on
an MPS, [
] will always be MPS→Lower Freq (not SPS).
Manual Tuning
1.
Press the [FM/AM] UI button to select the radio band (FM1, FM2, FM3 or AM).
2.
Press the [
] knob on the unit panel to change to tuning mode. Rotate the knob clockwise,
the frequency will go higher step by step. Rotate the knob counter-clockwise, the frequency
will go lower step by step. Three seconds later, without knob rotating, the unit will
automatically exit tuning mode.
3.
Press the [
] knob on the unit panel to leave tuning mode, when the unit in tuning mode.
4.
Touch the [
] or [
ü
When touching the [
ü
When touching the [
When digital audio is acquired, [
acquired, [
] will go to next frequency (Current Freq→Next Freq).
If on SPS, [
] will go to lower SPS or MPS (SPS→MPS→Next Freq). If not acquired, or on
an MPS, [
] will always be MPS→Lower Freq (not SPS).
Rolling Display
When the Genre and Text, Artist and title strings are too long to be displayed. The whole strings
will roll from left to right three times, then the rolling will stop. Touching the strings will make
them to roll three times again.
HD Radio subchannel tune
When the digital audio is available, the [
subchannel number button [
] UI button to change the frequency one by one step.
] key, the frequency will go higher with one step.
] key, the frequency will go lower with one step.
] will change to SPS (MPS→SPS→Next Freq).When not
] flag and the button [
] will tune up to next available subchannel.
] will appear. Touch the
Hide quick links:
Advertisement
Table of Contents
