Advertisement
4. Loosen the liquid material vat retaining screws one turn.
5. Push in the liquid material vat all the way. Take care not to get fingers caught between the liquid ma-
terial vat holder and the liquid material vat.
6. Securely tighten the liquid material vat retaining screws.
Liquid material vat
If you print repeatedly in the same location, the liquid material vat will turn cloudy white. When the liquid
material vat gets cloudy, resin stops hardening, the job sticks to the liquid material vat, and printing
becomes impossible. Change the position of the liquid material vat or position the model so as to avoid
cloudy areas. If it is not possible to print, replace the liquid material vat.
Liquid material vat
Pressing the liquid
material vat lowers
the shutter lever
Check that the liquid material vat stop-
per is down and is touching the outside
of the liquid material vat.
Liquid material vat in cloudy white state
16
Liquid material vat
Advertisement
