Advertisement
Supports
Necessary supports differ according to the shape of the model.
Refer to the model below as an example of which supports are necessary and which supports can be
deleted.
Deleting supports reduces the amount of resin required and enables a smoother finish after printing.
However, if more supports than necessary are deleted, there is a risk that the remaining supports will be
unable to support the model, which may drop into the liquid material vat.
If there are no supports in necessary locations...
On the "Supports" tab, select "Add/delete support point", and click [Select point to add].
Select the position where you want to add a support, and click [Update supports].
• Delete supports above the red line
• Supports below the red line are necessary to support the model
• "Horns" need supports
• "Tail" needs supports
12
Advertisement
