Flight Adjustment And Setting - Quadrone TUMBLER Instruction Manual

ON/OFF

9. FLIGHT ADJUSTMENT AND SETTING

It is important to practice maneuvers before flying your drone.
Before flying:
Please practice the following moves shown in the below pictures until you get
used to using the remote controller.
1. Bring the drone to an open space, standing aligned with the back of the drone.
2. Practice each exercise of the remote control as shown below, and repeat practice of
throttle up/down, sideways left/right, forward/backward, and turn left/right moves.
3. Flight simulation exercises are very important, please repeat the exercises until you
feel comfortable flying your drone flawlessly.
Mode
Sideways Left/Right
Forward/Backward
! CAUTION
Make sure that no people or obstructions are in the area.
You must first practice hovering for flying safety. This is a basic flight action.
Hovering means keeping the flight vehicle in mid air in a fixed position.
Please stand approximately 5 ft diagonally being the flight vehicle.
To quickly fine tune and calibrate the drone, place it on a flat surface.
Lower the joysticks to the lower right corner. Hold this position until
the drone finishes flash continuously. The drone is now fine tuned.
Illustration
Move Move
left right
Fly
forward
Fly
backward
Step 4
Turn off the transmitter. If transmitter is not to
be used for a long duration, please remove the
battery for storage.
Mode
Up/Down
Turn Left/Right
4
Illustration
Up
Down
Turn
left
Turn
right