Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RIKA NEX
Summary of Contents for RIKA NEX
- Page 1 Operating Manual...
-
Page 2: Table Of Contents
Feeding in external combustion air .................................10 5. ASSEMBLY/DISMANTLING STONE Assembly / disassembly stone .................................11 6. MANUAL OPERATION Combustion air regulation ..................................12 RIKA firelighter .....................................12 Correct heating up ....................................12 7. CLEANING AND MAINTENANCE Basic information ....................................13 Cleaning the combustion chamber .................................13 Empty the ash drawer .....................................13... -
Page 3: Preface
1. PREFACE Explanations to symbols ...Important ...Useful ...Hexalobular ...Manually Note Dimensions Technical data Technical data Heating power range [kW] 4 - 8 Room heating capacity (depending on house [m³] 90 - 210 insulation) Fuel consumption [kg/h] up to 2,2 Electric supply [V]/[Hz] 230/50 Average electrical input... -
Page 4: Spare Part Overview - Exploded Diagram
Spare part overview - exploded diagram... - Page 5 11 3 10 6 11 2 10 5 10 4 10 3 11 0 10 9 10 8 10 7 10 2 10 0 10 1...
-
Page 6: Spare Part Overview - Article Numbers
Spare part overview - article numbers Art.Nr.: Description Art.Nr.: Description B17561 Front door handle complete Z36255 Rear wall N111637 Setscrew door handle Z36034 Side casing soapstone right N112198 Cylindrical pin door handle Z35777 Side casing sandstone right N112065 Cylinder screw Z36028 Stone white right B12322... -
Page 7: Important Information
> 80 cm b > 20 cm RIKA stoves should only be installed in rooms with normal humidity (dry areas according to VDE 0100 Part 200). The furnaces are not splash water please observe a minimum distance of 20 cm behind and sideways the stove protected and may not be installed in wet areas. -
Page 8: Prior To Set Up
Prior to set up Stoves type 1 (BA 1): Suitable for multiple occupancy. (Note the different country regulations.) Floor bearing capacity Ensure that the substructure is capable of bearing the weight of the stove prior These may only be operated with the combustion chamber door closed. to set-up. -
Page 9: Brief Information On Combustible Logs
3. BRIEF INFORMATION ON COMBUSTIBLE LOGS Suitable fuels and fuel amounts Output controlling Your stove is generally suitable for burning dry firewood. You can also burn The output of your stove is regulated manually or via the Rikatronic-control. combustibles such as wood briquettes. Please observe that the output of your stove also depends on the chimney draught and the amount of fuel added. -
Page 10: Installing The Stove
The stove can also be pushed on this cardboard or carpet. Feeding in external combustion air We recommend original flue pipes from RIKA for proper connection. only for devices which are able to run in room-air independent operation. Connection to the chimney Combustion air must be fed to the stove from outside via a sealed pipe for operation independent of the room air. -
Page 11: Assembly/Dismantling Stone
5. ASSEMBLY/DISMANTLING STONE Note Only work on the unit when the mains plug has been disconnected and the stove has cooled down completely. Type Rikatronic4: Only work on the unit when it is switched off and the mains plug has been disconnected. Note During any conversion work, take particular care of your fingers and any panels and stove attachments. -
Page 12: Manual Operation
firelighter available. RIKA f irelighter Always ignite the RIKA firelighter on the red tip. One block consists out of 8 ribs which can be divided to the desired size. The amount of RIKA firelighters also depends on the size and humidity of your firewood. Ideally, one rib is enough to light up the fire. -
Page 13: Cleaning And Maintenance
7. CLEANING AND MAINTENANCE Basic information Cleaning the flame temperature sensor (only type Rikatronic4) Note When you vacuum clean around the stove ensure that you do not vacuum into Remove the dust deposits from the sensor at regular intervals. Use a clean the combustion air intake during heating operation. -
Page 14: Problems Possible Solutions
8. PROBLEMS POSSIBLE SOLUTIONS Problem 1 Problem 2 Fire burns with weak, orange flame, window is sooted up. Stove smells strongly and / or fumes are emitted. Cause(s) Cause(s) Poor chimney draught Burning-in phase (taking into service) Damp wood Stove has accumulated dust and/or dirt Possible solution(s) Incorrect heating up Wait to end of burning-in phase and vent sufficiently... -
Page 15: Guarantee
In case of doubt as well as missing or incorrect translations, the German version is the only valid one. For the purpose of timely damage limitation, the warranty claim on the part of the claimant is to be enforced at the RIKA dealer in writing using the invoice and stating the purchase date, model name, serial number and reason for complaint. - Page 16 Technical and design changes, as well as typesetting and printing errors reserved © 2015 | RIKA Innovative Ofentechnik GmbH RIKA Innovative Ofentechnik GmbH 4563 Micheldorf / Austria, Müllerviertel 20 Telefon: +43 7582 686 - 41, Fax-DW: 43 E-Mail: verkauf@rika.at RIKA.AT...
Need help?
Do you have a question about the NEX and is the answer not in the manual?
Questions and answers