iQ Pet no bark Owner's Manual page 4

How to Use the On/Off and Intensity Dial (picture ① )
- The On/Off & Intensity Dial on the collar is used to turn the iQ No
Bark Collar on and off, to select the intensity level, and to test the no bark
collar.
- Set the On/Off & Intensity Dial to the " " position to turn off the iQ
No Bark Collar.
- When the dial is set to the pager mode (P), the collar will only vibrate.
- Level (1 ) is the lowest stimulation level with level (1 0) being the highest. On
each level, a vibration is followed by the stimulation.
- Set the On/Off & Intensity Dial to the test mode (T) to test the iQ No
Bark Collar. See the Testing Guide for directions on how to test the iQ
No Bark Collar.
NOTICE
When first using the iQ No Bark Collar, it is recommended that you start
with the lowest level. If the dog continues to bark, gradually increase
the intensity level. Closely monitor your dog' s reaction to find the right
stimulation level.
LED battery life indicator (picture ② )
The LED indicator will flash for 1 second when the iQ No Bark Collar has
been turned on, and every 2 seconds af terwards. If your dog does not bark
for over 1 0 seconds, the LED indicator will turn off and the iQ No Bark
Collar will go into a sleep mode to conserve battery life. It will reactivate
when your dog barks and a vibration/correction needs to be made.
Operation modes
1. Non-stimulating Pager vibration mode
- Turn the intensity dial to P .
- When your dog barks, the iQ No Bark Collar will vibrate twice.
2. Stimulation modes 1-10
- Stimulation levels from 1 to 10, with 1 being the lowest level and 10 being
On/Off & Intensity Dial
P
1~10
T
Vibration only (non-stimulation)
Vibration followed by stimulation
- 3 -
Function
Power Off
Test mode