Please read this manual thoroughly before using the iQ No Bark Collar. PRODUCT SAFETY AND HEALTH STATEMENT 1 . The iQ No Bark Collar is intended to prevent the barking of dogs only. It is NOT intended for use on people or on animals other than dogs.
MAIN FEATURES - Reduced size receiver - Replaceable Coin Lithium Batteries (2). 3V CR2032 - Low to Medium power unit with 1 0 levels of stimulation - Non-stimulating Pager and Test modes - Bark recognition sensor - Fully waterproof - Conductive plastic contact points - Ergonomically designed to reduce pressure on your dog - Detachable collar strap DESCRIPTION...
Page 4
How to Use the On/Off and Intensity Dial (picture ① ) - The On/Off & Intensity Dial on the collar is used to turn the iQ No Bark Collar on and off, to select the intensity level, and to test the no bark collar.
- When the iQ No Bark collar is first activated by the dog’s bark, the unit will give a warning non-stimulating vibration. If the dog continues to bark, the unit will give a non-stimulating vibration followed by a correction at the level it is set on.
With the iQ No Bark Collar activating around 10 times a day, the battery will have an average life of about 2-weeks. - To clean the iQ No Bark Collar, make sure the battery cover is closed and fully sealed, and wipe down the unit with a damp cloth and some alcohol.
We strongly recommend keeping the original receipt. If your product is not registered and a proof of purchase is not available at the time of service, iQ Pet will estimate the age of the unit by the serial number. Serial number estimates can differ from the actual purchase date.
Page 8
If the unit is malfunctioning, please refer to the “Troubleshooting Guide” in the Owner’s Manual and call customer service at 1-888-81 1-91 1 1, for technical support, before sending it to iQ Pet for Service. The cost of shipping products under warranty back to iQ Pet is the customer’ s responsibility. iQ Pet is not responsible for units damaged or lost in transition to iQ Pet.