Image Quality - Panasonic WV-SFV130 Operating Instructions Manual

11 Configure the settings relating to images and audio [Image/Audio]
[Control time period]
Select the time period that the bit rate will be controlled for from the following. Images are transmitted so that
the average transmission rate during the selected period becomes the bit rate selected for "Max bit rate (per
client)*".
1h/6h/24h/1week
•
Default: 24h
Note
•
This setting is only available when "Advanced VBR" is selected for "Transmission priority".
[Max bit rate (per client)*]
Select a H.264 bit rate per a client from the following. When "Best effort" is selected for "Transmission
priority", set the maximum and minimum bit rates.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/
24576kbps*/ 30720kbps*/ 40960kbps*
•
Default:
–
H.264(1): 4096kbps*
–
H.264(2): 1536kbps*
–
H.264(3): 1024kbps*
–
H.264(4): 512kbps*
* The range of bit rates that can be configured for H.264 bit rates differs depending on the "Transmission
priority" and "Image capture size".
When "Constant bit rate", "Frame rate", "Advanced VBR", or "Best effort" is selected for "Transmission
priority"
•
160x120 and 160x90: 64kbps - 2048kbps*
•
QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 4096kbps*
•
800x600: 128kbps* - 4096kbps*
•
1280x960 and 1280x720: 256kbps* - 8192kbps*
•
1920x1080 and 1600x1200: 512kbps* - 14336kbps*
•
2048x1536: 1024kbps* - 24576kbps*
When "VBR" is selected for "Transmission priority"
•
160x120 and 160x90: 64kbps - 40960kbps*
•
QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 40960kbps*
•
800x600: 128kbps* - 40960kbps*
•
1280x960 and 1280x720: 256kbps* - 40960kbps*
•
1920x1080 and 1600x1200: 512kbps* - 40960kbps*
•
2048x1536: 1024kbps* - 40960kbps*
Note
•
The H.264 bit rate is restricted by "Bandwidth control(bit rate)" on the [Network] tab on the "Network"
page (®page 130). For this reason, the bit rate may be lower than the value when any value with an
asterisk (*) on the right is selected.

[Image quality]

Select the image quality of H.264 images from the following.
•
When "Transmission priority" is set to "Constant bit rate" or "Best effort": Low(Motion priority)/
Normal/ Fine(Image quality priority)
•
VBR: 0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•
Default: Normal
78 Operating Instructions
/ 2048kbps*
SFV130
SFV130
SFV130
SFV110
SFV130
SFV130