JVC KD-AVX20E Service Manual page 10

(5) Remove the one screw J attaching the Heat sink. (See
Fig.7)
(6) Remove the four screws K and one screw L attaching the
Rear bracket. (See Fig.7)
L
(7) Disconnect the connector wires from Rear bracket con-
nected to connectors CN861, CN871, CN922,
CN931 of the Main board. (See Fig.8)
CN931
CN922 CN871
3.1.3 Removing the DVD mechanism (See Fig.9)
(1) Remove the three screws M attaching the DVD mecha-
nism.
1-10 (No.MA446<Rev.001>)
H
Fig.6
J
K
Fig.7
CN923
CN923 CN861
Fig.8
M
3.1.4 Removing the Connection board (See Fig.10)
(1) Disconnect the card wire from DVD mechanism connected
to connector CN395
(2) Disconnect the connector wire from BT antenna connected
to connector of RF module.
(3) Remove the three screws N attaching the Connection
board.
Connecotr
wire
and
3.1.5 Removing the Panel A control board (See Fig.11)
(1) Remove the eight screws P attaching the Rear cover.
M
Fig.9
of the Connection board.
N
CN395
RF module
N
Fig.10
P
P
Fig.11
M