3B SCIENTIFIC PHYSICS 1001011 Instruction Sheet

Tube power supply unit 0-300 v @ 115-230v

Download this manual

3B SCIENTIFIC ® PHYSICS

Tube power supply unit 0–300 V @115 V 1001011

Tube power supply unit 0–300 V @230 V 1001012

Instruction sheet

06/15 ALF

1 Main ON/OFF switch

2 Voltage regulator 0-300 V

3 Current limit regulator 0-200 mA

4 Operation indicator for current limit

5 Output sockets 0-300 V (constant, linear rise/fall)

6 Common ground

7 Voltage regulator 0-50 V

8 Output sockets 0-50 V

9 Voltage regulator 4-12 V

10 Output sockets 4-12 V

11 PE socket

12 Sockets for timer

13 Regulator for rate of voltage drop

14 Rotary switch for increasing, maintaining or

reducing output voltage

15 Regulator for rate of voltage rise

16 ON/OFF switch for ramp generator

Page 1 3B SCIENTIFIC ® PHYSICS Tube power supply unit 0–300 V @115 V 1001011 Tube power supply unit 0–300 V @230 V 1001012 Instruction sheet 06/15 ALF 1 Main ON/OFF switch 10 Output sockets 4-12 V 2 Voltage regulator 0-300 V...
Page 2 Never cover the air vents at the rear of the ter, etc.) housing. They are necessary in order to en- The tube power supply unit 1001011 is for oper- sure sufficient circulation of air required for ation with a mains voltage of 115 V (±10%), and...
Page 3 3. Technical data 5. Storage, cleaning and disposal  Output voltage: 4-15 V DC, 400 mA Keep the equipment in a clean, dry and 0-50 V DC, 10 mA dust-free place. 0-300 V DC, 0-200 mA  Before cleaning the equipment, disconnect it 0-350 V DC*, 0-10 mA from its power supply.
Page 4 6. Sample experiments ı 0...300 V 0...-50 V 6...12 V Fig. 1: Experimental set-up for filament tube ı Fig. 2: Experimental set-up for plate capacitor 3B Scientific GmbH ▪ Rudorffweg 8 ▪ 21031 Hamburg ▪ Germany ▪ www.3bscientific.com Technical amendments are possible ©...

1001012