Setting The Clock; Performing “Quick” Setup - Sony MHC-GZR999D Operating Instruction

Setting the clock

Use buttons on the remote to set the
clock.
1
Press / to turn on the system.
2
Press TIMER MENU.
The hour indication flashes in the
display.
If "PLAY SET?" flashes in the display,
press  or  repeatedly to select
"CLOCK SET?, " then press ENTER.
3
Press  or  repeatedly to set
the hour, and then press ENTER.
4
Use the same procedure to set
the minutes.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY repeatedly until the clock
is displayed.
The clock is displayed for about
8 seconds.

GB
Performing "QUICK"
setup
Before using the system, you can make
the minimum basic adjustments in
"QUICK" setup. If you do not want to
perform "QUICK" setup, press CLEAR in
step 3. The guide message will disappear
from the TV screen.
1
Turn on your TV and select the
video input.
2
Press / to turn on the system.
Notes
 Make sure there is no disc in the unit.
Otherwise, the guide message does not
appear.
 Make sure that headphones or
microphones are not connected.
Otherwise, you cannot perform
"SPEAKER SETUP. "
3
Press FUNCTION +/ repeatedly
to select "DVD" (or press DVD on
the unit).
The guide message appears at the
bottom of the TV screen.