Operation - Sharp IG-DC2E Operation Manual

OPERATION

To select the preferred mode
TURBO
While the operation is stopped
• The "TURBO" operation is enabled by
just pressing the Turbo Button. When
the "TURBO" operation is executed by
pressing the button, the operation is
stopped by pressing the Turbo Button or
Operation Button.
Engine interlocking function
If the vehicle's engine is turned off and the vehicle is stopped while the unit is
operating, the unit resumes operating in the same mode when the vehicle's
engine is started back up.
• For preventing you from forgetting to turn OFF the product, it automatically
stops after 8 hours from the operation is started, however, if the main unit
is operated even if the key of the vehicle is pulled out or the engine switch
is turned OFF, pull out the cigar plug for preventing the dead battery.
IG-DC2E.EN.indd 9 IG-DC2E.EN.indd 9
LOW
HIGH
Press
'OFF'
If you want to operate the
product in silence
Release high-density
Plasmacluster ions quietly.
If you want to operate the
product at strong fl ow rate
Release high-density
Plasmacluster ions at high fan
speed.
Power 'OFF'.
When you want to remove the odor quickly
Approximately two fold Plasmacluster ion is of
"HIGH" fan speed is discharged with stronger
air volume.
• After smoking
• After eating in a vehicle
• When you are conscious about odor of air
conditioner
In operation
• The operation is switched to "TURBO"
operation by pressing the Turbo Button.
• If you press the Turbo Button or Operation
Button during the "TURBO" operation,
the mode returns to the operation mode
immediately before the "TURBO" operation.
E-7
2012/04/18 17:39:11 2012/04/18 17:39:11