Sharp IG-DC2E Operation Manual page 11

Plasmacluster Ion Generating Unit (electrode section)
Every 6 months or more often if necessary
Dust, fl uorine resin, or silicone may be attached and the Plasmacluster ion
may not be generated depending on the use environment*. Carry out the
maintenance periodically.
If such a message is displayed, carry out the maintenance of the
Plasmacluster Ion Generating Unit (electrode section).
The Operation Lights "LOW" and "HIGH" (blue) fl ash
at the same time and the operation is stopped.
Remove the Plasmacluster Ion Generating Unit from the main unit referencing
"Plasmacluster Ion Generating Unit Replacement". (See E-11)
Remove dust or foreign object attached to the electrode (needle) of the Plasmacluster
Ion Generating Unit or periphery with a cotton swab.
Electrode
section
• Do not touch the electrode section. (Doing so could lead to injury.)
• Do not transform the electrode section. (Doing so could lead to damage.)
• Do not touch the connection terminals. (Doing so could lead to damage.)
• Please damp the tip of a cotton swab with little water, if the dirt does not come off
easily.
* Places where hair care products (split end coatings, hair mousses, hair treatments,
etc.), cosmetics, antiperspirants, antistatic agents, waterproofi ng sprays, polishes,
glass cleaners, chemicalimpregnated clothes, wax, etc. are used or smoking
environment.
IG-DC2E.EN.indd 11 IG-DC2E.EN.indd 11
Cotton
swab
Electrode (needle)
Do not
touch the
[Before cleaning]
connection
terminal
E-9
Flashing (blue)
Circumference
of base part
[After cleaning]
2012/04/05 13:08:27 2012/04/05 13:08:27