Sharp IG-DC2E Operation Manual page 8

5
IG-DC2E.EN.indd 8 IG-DC2E.EN.indd 8
Set the unit in the cup holder
with its air outlets facing in
the desired direction.
Cautions on wiring the car adapter
• Do not let the cord touch or get caught in the seat rails, shift lever or other
moving parts.
• Wire in such a way that the cord does not get in the way of the driver.
• Consider the movement of the seats (forward/backward, swiveling or
reclining) when wiring.
• Do not bend the cord extremely or compress it.
Cautions on installation
• Separate the main unit from electronic
key of vehicle by 30cm or more.
Otherwise, it may interferes with
electronic wave of main unit and the
electronic key may not be recognized.
• Be sure to place on a stable location. (Do not put in a commercially
available cup holder or other unstable place.)
• Do not obstruct the air inlet or outlet.
• Keep the unit away from the vehicle's in-glass antenna. Failure to do so
could cause noise in the radio.
• If there should be noise in a TV or radio located in the same car, or if an
atomic clock in the car should not display the time properly, move the unit
away from the TV, radio, atomic clock, etc.
• If the unit is installed directly in front of the car climate control's outlets, the
unit could get hot when the climate control is operating in the heating mode.
• The unit could get scratched by the vibrations of the vehicle, etc.
Air outlet
Separate the main unit from electronic
key of vehicle by 30cm or more.
E-6
2012/04/05 13:08:26 2012/04/05 13:08:26