Wine Storage System; Shelf Removal - Viking VCWB301 Use & Care Manual

Wine Storage System

Versatile Shelving System
Your wine cellar's shelving system makes it easy to store
standard, magnum and half-size bottles easily. There are a total
of fifteen wine shelves which will each accommodate 10
standard bottles of wine, alternately displayed. Two convertible
wine shelves adjust to allow bottles to be displayed.
Loading the Shelves
To load a shelf, pull the shelf forward and place the bottles on
the shelf with the neck in the center of the shelf. Alternate the
direction of the next bottle. Note the illustration below for
maximum bottle storage. Shelves may need to be removed to
store some bottles.

Shelf Removal

To remove a wine shelf:
1) Pull the shelf forward until it is fully extended.
3) Remove from the glide.
To replace the shelf, line shelf up with glide, lower into place and push shelf back.
CAUTION
To store magnum or oversized bottles, the shelf directly
above must be removed. Failure to do so could result in
bottle breakage. See "Shelf Removal" section for proper
shelf removal.
CAUTION
Remove wine bottles from shelves before removing shelves.
Failure to do so could result in bottle breakage.
Wood
Front
2) Lift up the front of the shelf.
9