Error Codes - Russell Hobbs RHWD861400 Instruction Manual

Error Codes

Display Description
E01 The door of your machine is left open.
E02 Water cut-off or low mains water
•
pressure.
E03 Pump filter is clogged.
•
Pump is damaged.
•
Electrical connection is
•
malfunctioning.
E04 Your machine has excessive
•
amount of water.
(*) See page 56
(**) See page 57 - 58
All repairs to your machine should be carried out by a qualified engineer or contact Product
Care on 0345 208 8750.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
www.productcareuk.com
or visit us at
53
Solution
Close the machine door.
•
If the problem persists, unplug your machine, turn
off your tap and contact
0345 208 8750
Water tap may be closed. Check.
•
Mains water may be cut-off. Check.
•
If so, switch the programme knob
•
position. You can select a programme and run
your machine after the mains water is supplied.
Mains water pressure may be low. Check.
Water inlet hose may be twisted. Check. Water
•
inlet hose may be clogged.
Clean water inlet hose and valve inlet filters.(*)
•
If the problem persists, unplug your machine,
turn off your tap and contact
on 0345 208 8750
Clean the pump filter. (**)
•
If the problem persists, unplug your machine, turn
off your tap and contact
0345 208 8750
Your machine will drain water by itself. Pursuant
•
to draining operation, turn off your machine
and unplug it.
If the problem persists, unplug your machine, turn
off your tap and contact
0345 208 8750
Customer Services on
to 'Stop'
Customer Services
Customer Services on
Customer Services on