Specific Safety Rules And Symbols - Hitachi D 13VB2 Instruction Manual And Safety Instructions

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear plugs when using the tool for extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
3. NEVER touch the tool bit with bare hands after operation.
4. NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string,
etc.
5. ALWAYS attach the side handle and securely grip the Drill.
6. ALWAYS be careful with buried object such as an underground wiring.
Touching these active wiring or electric cable with this tool, you may receive an electric
shock.
Confirm if there are any buried object such as electric cable within the wall, floor or ceiling
where you are going tos operate here after.
7. Definitions for symbols used on this tool
V ............. volts
Hz ........... hertz
A ............. amperes
n
........... no load speed
o
W ............ watt
............ Class II Construction
---/min .... revolutions per minute
English
7