Table of Contents
Advertisement
6-2. Demolition Performance Comparisons
The data shown in Fig. 5 are obtained in actual factory tests, and are for reference only. The demolished amount
may vary in accordance with operating conditions, operator skill, etc.
At rated
voltage
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Model H 70SD Electric Hammer by all of our
customers, it is very important that, at the time of sale, the salesperson carefully ensures that the buyer seriously
recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the
precautions listed on the Caution Plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric tool cannot be completely eliminated. Accordingly,
general precautions and suggestions for the use of electric power tools, and specific precautions and suggestions
for the use of the Electric Hammer are listed in the Handling Instructions to enhance the safe, efficient use of the
tool by the customer. Salespersons must be thoroughly familiar with the contents of the Handling Instructions to
be able to offer appropriate guidance to the customer during sales promotion.
7-2. Caution Plate
The Model H 70SD unit is provided with a Nameplate (illustrated below) which lists basic safety precautions in its
use. Carefully ensure that the customer fully understands and follows these precautions before using the tool.
For Australia
100
150
H 70SD
H 70SA
•
H 65SD
161 (355 lbs.)
C
Fig. 5
--- 8 ---
Demolished amount
200
250
(kg/30 min.)
203 (448 lbs.)
203 (448 lbs.)
Advertisement
Table of Contents
