Imation defender H200 +BIO User Manual page 10

TROUBLESHOOTING
cont.
Table 1: LED status for devices
LED status
Flashing red
Solid red
Blue LED
Flashing red and
blue
Status of power to device
Solid yellow
Flashing yellow
(slow)
Flashing yellow
(fast)
No yellow LED
Description
The device is either powering up or is totally blocked. When
totally blocked, no authentication methods are available to allow
a user to log into the device; this indicates that the device needs
to be recycled.
The device is locked.
Indicates a data transfer activity for all devices.
Indicates that a fatal internal error has occurred.
Sufficient power from the host computer is available and the
device is operating normally.
Insufficient power to operate the device. Attach both USB
connectors to the host computer. If both connectors are already
plugged in, and the LED continues to flash, the host computer
does not meet the USB power requirements.
Power detection has timed out. Unplug all USB connections and
reconnect the them.
No power is detected. Device is off.
10