Subscribe to Our Youtube Channel
Related Manuals for Imation DEFENDER F100
Summary of Contents for Imation DEFENDER F100
-
Page 1: Table Of Contents
DEFENDER™ F100 & DEFENDER™ F150 USER GUIDE Contents Introducing Defender™ F100 & Defender™ F150 Minimum System Requirements Imation Documentation Getting Started Opening and closing a device Attaching the lanyard loop Personalizing a device Accessing data on the device Logging into and out of the device... -
Page 2: Introducing Defender™ F100 & Defender™ F150
This guide is designed to help you set up your device with minimal effort. MINIMUM SYSTEM REQUIREMENTS Defender F100 and Defender F150 come with built-in Imation Defender ACCESS Standard™ software on the application partition. The following list describes the requirements you need to use your device with ACCESS Standard. -
Page 3: Getting Started
Slide the device into the front cap and squeeze the caps together. ATTACHING THE LANYARD LOOP Defender F100 and Defender F150 come with a lan- yard loop that allows you to attach it to lanyards or other objects. To attach the lanyard loop (optional) Insert the small threaded end of the lanyard through the hole in the main part of the device. - Page 4 GETTING STARTED cont. Grip both ends of the lanyard loop and bend the ends towards each other in a circle. Insert the small end into the larger barrel. Turn the larger barrel to thread the parts together. When the small bullet is completely inside the larger barrel, the loop is secure and ready for use.
-
Page 5: Personalizing A Device
GETTING STARTED cont. To remove the lanyard loop Turn the barrel (counter-clockwise) to loosen the small bullet. When the small bullet is completely separated from the larger barrel, pull the lanyard loop apart. PERSONALIZING A DEVICE When you plug in a new device, you must personalize it before you can use the authentication and private partition features. - Page 6 (If necessary, in the notification area at the far right of the taskbar, click the Imation Defender icon, and then click Personalize Device from the menu.) On the main page of ACCESS Standard, click Personalize Device.
-
Page 7: Accessing Data On The Device
ACCESSING DATA ON THE DEVICE After you personalize a device, only registered users can authenticate to it. Authentication involves logging into the device using a password. After you successfully log in, you can save files to, and open files from, your private partition. It is recommended that you log out of your device if you must leave it connected while you are away from your computer. -
Page 8: Disconnecting The Device
ACCESSING DATA ON THE DEVICE cont. Once you log into the device, you can open files on your private partition using the appropriate program or a file manager. When you save data to your private partition, the device encrypts the data using hardware-based AES 256-bit encryption. -
Page 9: Troubleshooting
User Guide, read the following troubleshooting information. • Check to make sure the device is plugged in properly. • Check the LED status of the device. • Check the Frequently Asked Questions section at Imation.com/support. Table 1: LED states State... -
Page 10: Warranty Information
Imation’s option. Proof of purchase is required to obtain warranty service. This warranty does not apply to normal wear or bundled software. Imation will not be liable for any lost data or other indirect, incidental or consequential damages.
Need help?
Do you have a question about the DEFENDER F100 and is the answer not in the manual?
Questions and answers