Table of Contents
Advertisement
1.2
Communication conditions
For information about the connection methods available for the model in use, see the Appendix "Connecting an
External Device".
Serial connection
The RS-232C-compliant communication method is supported. Specify the communication settings of the software
used to send and receive commands, as shown below.
Item
Baud rate
Data length
Parity bit
Stop bit
Communication mode
LAN connection
Wired LAN
Item
Data rate
Supported standard
Wireless LAN
See the operation manual of the wireless LAN unit to be used.
Port number
Use TCP port number "7142" for sending and receiving commands.
115200/38400/19200/9600/4800 bps
8 bits
None
1 bit
Full duplex
Auto switchable (10/100 Mbps)
IEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX, Auto-Negotiation)
7
Detail
Detail
Advertisement
Table of Contents
