Charge The Battery - Nikon Coolpix P610 Quick Start Manual

Charge the Battery

1
With the battery installed, connect the camera to an
electrical outlet.
Power-on lamp (charge lamp)
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or region in
which the camera was purchased.
This step can be omitted if the plug adapter comes permanently bonded to
the charging AC adapter.
• The power-on lamp (charge lamp) slowly flashes green to indicate that the
battery is charging.
• When charging is complete, the power-on lamp turns off. It takes about 3
hours to charge a fully exhausted battery.
• The battery cannot be charged when the power-on lamp quickly flashes
green, possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
2
Disconnect the charging AC adapter from the electrical
outlet and then disconnect the USB cable.
Charging AC Adapter
USB cable (included)
Preparing for Shooting
Electrical outlet
9