Overview - Sony NSR-S10 Installation Manual

• To ensure proper operation of USB
devices, do not connect the devices via a
USB hub. Connect the devices directly to
the USB connectors on the unit.
Operation is not guaranteed when
devices are connected via a USB hub,
USB switch, or extension cable.

Overview

The NSR-S10/S20 is a network
surveillance recorder for network cameras.
The server allows you to monitor and
record JPEG, MPEG-4, and H.264 images
from network cameras via the network. The
server also allows you to easily search for
and play back previously recorded images.
Manage and control compatible
cameras from remote locations
You can manage, control, and display the
images from up to four network cameras
with the NSR-S10, and up to eight network
cameras with the NSR-S20. You can pan,
tilt, and perform zoom operations of
compatible cameras.
Large-capacity hard disks allow
recording for long periods of time
Models with internal hard disks are
equipped with large-capacity storage that
enables recording for extended periods of
time. In addition, the unit allows you to
connect storage devices that support the e-
SATA interface.
Monitor from a browser
You can access the NSR from a browser,
which then can be used to monitor images.
Other features
• The NSR is capable of continuous
recording, motion detection, and alarm
recording, among others.
• Run searches for recorded images by date
and time, sensors, movement detection,
video signal loss, etc.
• Audio recording and playback
supported from compatible cameras.
1) Optional audio amplifiers or speakers are
required.
1)
are also
Overview 7