Table of Contents
Advertisement
Preparation
9
Winding the bobbin thread, adjusting the thread tension
.02
If the thread is wound unevenly:
9 - 2
3
2
Fig. 9 - 02
Place an empty bobbin 1 onto bobbin shaft 2.
Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin 1
a few times.
Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and
lever 3.
The bobbin fills up during sewing.
If the machine is only being used to wind the bobbin (without sewing), a bobbin
case must be inserted in the hook! (Danger of damage to the hook).
The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.
The bobbin winder stops automatically when bobbin 1 is full.
Loosen nut 5.
Turn thread guide 6 accordingly.
Tighten nut 5.
1
4
-
+
6
5
Advertisement
Table of Contents
