Superior VRE4543EN Installation And Operation Instructions Manual page 10

FINISHING FIREPLACE FOR INSTALLATION
The VRE4543 series fireplace come with the rear panel semi-installed.
If you will be using the fireplace for a one sided regular application,
you will need to finish the installation of the rear panel. If you will be
upgrading the fireplace to a see-thru, the rear panel will need to be
removed (See Upgrading VRE4543 Series to See-Thru Application).
1. Using self-tapping screws provided and holes on rear panel as
a guide, screw the rear panel to the fireplace as shown in Figure
14.
INSTALLING HOOD
1. Loosen screws at top of face opening and slide hood through
screws as shown in Figure 15.
2. Tighten screws securing hood to fireplace.
Figure 14 - Installing Rear Panel for Regular Applications
Figure 15 - Installing Hood
10
INSTALLATION Continued
UPGRADING VRE4543 TO SEE-THRU APPLICATION
Removing Rear Panel
1. In the rear of the fireplace, locate screws at top of rear panel and
remove as shown in Figure 16. Discard screws and rear panel.
2. Unscrew mount bracket from top face as shown in Figure 17.
Discard mounting bracket and replace screws.
Figure 16 - Removing Rear Panel for See-Thru Applications
Figure 17 - Removing for See-Thru Applications
SuperiorFireplaces.US.com 127035-01C