Tiger PDR-A30U User Manual page 21

Where to buy replacement parts and accessories.
Contact customer service
Gaskets (Consumer replaceable parts)
We recommend replacing the gasket annually or
following these cases:
• Color changed to white.
• Any deterioration, spots become bigger.
• Steam coming out from gaps on the side.
Parts code
How to remove
Unfasten the
screws
Remove lid
Screw
gasket
How to attach
Insert the lid gasket on to inner cover in
proper position.
Lid gasket orientation
Run ngers
around inner
cover to press
in to groove
Be sure the gasket is attached properly.
Attach 3 screws securely.
PDA1090
How to replace lid gasket
Lid gasket
Fit the
gasket
into
groove
Lid gasket
Cross-section
Inner cover
Lid gasket
Resin parts
Resin parts may deteriorate over time due to contacting
heat and steam. Replacement lid is purchase separately.
Mesh filter (consumer replaceableparts)
• Attach mesh filter when cleaning the unit with citric acid.
If mineral deposit is not removed, please purchase new
one.
Parts code
Caution
Do not remove inner cover from lid. Improper
setting can cause steam leakage and hot water
will not dispense. If inner cover comes o , reattach
the parts as shown below.
Be sure to set in
the direction
shown in this
illustration. (If set
improperly,
hot water may spill
and cause scalds.)
Replacing parts for the lid should only be
contact your local distributor or Tiger
directly.
PVH1184
3 Screws
Inner cover
Lid gasket
Small gasket
Plug valve
Lid
20