Osd Menu - Philips BDL5551EL/00 Service Monitor

14
12. Picture Format button
Press to switch screen aspect ratio.
 For PC signal: Full, Normal, Custom and Real.
 For Video signal: Full, Normal, Dynamic, Custom,
Real, and 21:9.
13. [BRIGHTNESS] Button
Press to toggle Brightness Menu. Press [+] or [-]
button to adjust the value. Press [MENU] button to
confirm and exit.
14. [▲] Button
 Press to move the selection up in OSD menu.
 Press to move the sub-picture up in PIP mode.
15. [MENU] Button
Press to turn the OSD menu on/off
16. [+] Button
3.4 OSD Men
3.4.1 Navigating the OSD Menu
Using the remote control
1. Press [MENU] button on the remote control to
display the OSD menu.
2. Press [▲] or [▼] button to choose the item you
want to adjust.
3. Press [SET] or [+] button to enter the submenu.
4. In the submenu, press [▲] or [▼] button to toggle
among items, press [+] or [-] button to adjust
settings. If there is a submenu, press [SET] or [+]
button to enter the submenu.
 Press to move the selection right in OSD menu.
 Press to increase the value in OSD menu.
 Press to move the sub-picture right in PIP mode
17. [EXIT] Button
Press to turn back to the previous OSD menu.
18. [▼] Button
 Press to move the selection down in OSD menu.
 Press to move the sub- picture down in PIP mode.
19. [VOL UP] Button
Press to increase the audio output level.
20. [VOL DOWN] Button
Press to decrease the audio output level
21. [USB MENE] Button
Press to enter the USB menu for the USB input.
5. Press [EXIT] button to return to the previous menu,
or press [MENU] button to exit the OSD menu
Using the display's control button
1. Press [MENU] button to display the OSD menu.
2. Press [+] or [-] button to choose the item you want
to adjust.
3. Press [+] button to enter the submenu.
4. In the submenu, press [▲] or [▼] button to toggle
among items, press [+] or [-] button to adjust
settings. If there is a submenu, press [+] button to
enter the submenu.
5. Press [MENU] button to return to the previous
menu, or press [MENU] button several time to exit
the OSD menu.