Remote Control - Philips BDL5551EL/00 Service Monitor

3.3 Remote Control

1. [POWER] Button
Press to switch on the display from standby mode.
Press again to turn it off and back into standby
mode.
2. [SMART] Button
Press to activate Smart Menu. Press [▲] or [▼]
button to select menu options. Press [SET] button
to confirm and exit selection.
 Standard: Used for normal images (factory
setting)
 Highbright: Used for moving image such as
video
 sRGB: Used for text based images(only for PC
mode)
 Cinema: Used for movies(only for Video mode)
3. [PIP] (Picture In Picture) Button
[ON/OFF]: Turn PIP mode ON/OFF.
[INPUT]: Select the input signal for the sub
picture.
[CHANGE]: Toggle between the main picture and
sub picture.
4. [CONTRAST] Button:
Press to activate Contrast Menu. Press the [+] or
[-] button to adjust the value. Press [MENU]
button to confirm and exit.
5. [DISPLAY] Button
Press to turn on/off the information OSD displayed
on the upper right corner of the screen.
6. [-] Button
 Press to move the selection left in OSD menu.
 Press to decrease the value in OSD menu.
 Press to move the sub picture left in PIP mode.
7. [SET] Button
Press to activate the setting inside the OSD menu.
8. [AUTO ADJUST] Button
Press to run the Auto Adjust function.
Note: This button is functional for VGA input only.
9. [MUTE] Button
Press to turn the mute function on/off.
10. [VIDEO SOURCE] Button
Press to toggle Video Source Menu. Press [▲] or
[▼] button to select one of the video sources
among Displayport, DVI-D, VGA, HDMI,
Component, Video, Card OPS, or USB. Press
[SET] button to confirm and exit.
11. [AUDIO SOURCE] Button
Press to toggle Audio Source Menu. Press [▲] or
[▼] button to select one of the audio sources
among Displayport, HDMI, AUDIO1, AUDIO2,
USB or Card OPS. Press [SET] button to confirm
and exit.
13