Operation Instructions; Control Panel - Philips BDL5551EL/00 Service Monitor

10
3. Operating Instructions

3.1 Control Panel

1. POWER Button
Use this button to turn the display on or put the
display to standby.
2. Mute Button
Switch the audio mute ON/OFF.
3. INPUT Button
Use this button to select the input source.

4. [+] Button
Increase the adjustment while OSD menu is on, or
increase the audio output level while OSD menu is
off.
 Used as [SET] button in the On-Screen-
Display menu,
5. [-] Button
Decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is
off.
6. [▲] Button
Move the highlight bar up to adjust the selected
item while OSD menu is on.
7. [▼] Button
Move the highlight bar down to adjust the selected
item while OSD menu is on.
8. MENU Button
Return to previous menu while OSD menu is on, or
to activate the OSD menu when the OSD menu is
off.
Note:
"Keyboard Control Lock Mode": This function
completely disables the access to all Keyboard
Control functions. To enable or disable the
keyboard control lock, press both "[▲]" and "[▼]"
buttons and hold down continuously for more than 3
(three) seconds.
9. Remote Control Sensor and Power Status
Indicator
 Receives command signals from the remote
control
 Indicates the operating status of the display
without OPS.
- Lights green when the display is turned on
- Lights red when the display is in standby
mode
- Lights amber when the display enters APM
mode
- When (SCHEDULE) is enable, the light blinks
green and red
- If the light blinks red, it indicates that a failure