Advertisement
Available languages
Available languages
3) Exchanging data with the TrekStor i.Beat veo
Windows® 7 / Vista™ / XP
a)
Select the desired files (such as MP3) with the mouse. Copy these files by clicking
them with your right mouse button ("c
b) Under "m
c
y
omputer
"t
S
".
reK
tor
c)
Right-click the device and select "p
the data will be available on your device.
4) Charging the TrekStor i.Beat veo
The TrekStor i.Beat veo starts charging automatically as soon as you connect it to a
computer. The battery is charged after a maximum of three to four hours; charging stops
automatically to prevent overcharging.
The maximum operating time can be reached only after approximately 10 battery
i
charging cycles have been completed.
5) Logging off and disconnecting the TrekStor i.Beat veo from
the computer
Please follow the recommended logout procedure to prevent damage to the device or
i
data loss!
Windows® 7 / Vista™ / XP
At the bottom right on the task bar, left-click the "S
popup menu that appears, left-click "S
You can now disconnect your device from the computer.
6) Operation of the TrekStor i.Beat veo
Your device can generate high volumes; for this reason, make sure that the volume is not
i
too high while you are listening to it. Further information on this topic can be found at the
end of these operating instructions.
Turning the device on and off
If you want to switch on your i.Beat veo, hold down the
Logo appears on the screen. To switch off the device again, press the
approximately 3 seconds.
Adjusting the volume
Press shortly the
,
volume. When you keep one of the buttons pressed, the volume changes continuously.
" or "c
", select the device with removable storage,
omputer
ASte
AFely
button respective the
").
opy
" to start copying. After copying has completed,
r
AFely
emove
r
m
S
emove
ASS
torAge
button until the TrekStor-
A
button in order to raise or lower the
;
h
" icon. In the
ArdWAre
d
- d
" to select it.
evice
rive
button for
A
9
EN
Advertisement
