Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual page 33

If there is a problem with your cooker, check the following details before requesting service to your dealer. Sometimes the
cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with " "
When the Pressure
"Cook/Turbo" Timer
button are not operate
with " "
When the rice is badly sticky.
When " " is showed
on the LCD
When the time cannot be
preset.
When you smell after and
before cooking?
When the top cover cannot be
closed.
When " ", " " are
shown on the LCD by turns.
When " ", " " are
shown on the LCD by turns.
" "signisdisplayedduring
thecooking,warming/reheating,
orpresetprocessisactivated.
" "or" "markshows
upduringtheproductoperation
Check points
Is there inner pot inserted?
Check the rated voltage?
Did you turn the Lock/Unlock Handle
to "Lock"
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
Check the rated Voitage?
Is the current time correct?
Is AM or PM set properly?
Did you set the reservation time over 13
hours?
Did you clean it after cooking?
Is the inner pot correctly inserted in the main
body?
Is the Lock/Unlock handle on the top cover
set to "Lock"?
Is there hot food in the inner pot?
Micom power is out.
The sensor is broken.
Is there inner pot in the product?
CHECK BEFORE ASKING
FOR SERVICE
Do the following
Please insert inner pot.
This product is 120V only.
Please turn the "Lock/Unlock" handle to "Lock".
Clean all the alien substance on the temperature
sensor or the bottom surface of the inner pot.
Cut the power and contact customer service.
It is normal to get "
water.
This is only for 120V.
Set the current time. (Refer to page 13)
Check the AM and PM.
Maximum reservation time is 13 hours. (Refer to
page 25~26)
Please clean it after cooking.
Please put in the inner pot perfectly.
Please turn the "Lock/Unlock" handle to "Lock".
Pull the pressure handle to aside once.
Please cut the power and contact customer service.
Please cut the power and contact customer service.
Please insert inner pot
If the sign continuously displayed, cut the power and
contact customer service.
This function checks to see if power or product has
abnormality. If the mark shows up continuously,
contact customer service.
" when putting only