How To Clean The Soft Steam Cap; How To Clean Dew Dish; How To Use Cleaning Pin And Brush Kit - Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual

If the valve hole of the pressure weight part is clogged, punch it with the cleaning pin
The valve hole of the pressure weight allowing the escape of steam should be checked regularly to
ensure that it is not blocked.
If you use the valve hole of pressure weight as it is blocked, the hot steam or any hot content within the
cooker can cause injury.
Do not use a Cleaning Pin for other use except cleaning for the valve hole of the pressure weight.
How to
disassemble the
pressure weigh

How to clean the soft steam cap

Do not touch the surface of the soft steam cap right after cooking. You can get burned.
Detach the soft Pressthehook,intheback,andfollowthearrow
steam cap like the todetachandclean.Makesureyouclean
picture. frequentlywithaspongeoraneutraldetergent.

How to clean dew dish

Separate dew Separate a drain
ditch cap as
dish.
pushing it down.

How to use cleaning pin and brush kit

Separate cleaning & Attached
on the bottom of the unit from
main body like picture
Under the Lock/Unlock handle is locked(located on "Lock") turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
Punch the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
When the pressure weight is properly assembled, it can freely be turned.
Clean a drain ditch
cap and dew dish
with a neutral
detergent.
Separatecoveras Use brush kit.
arrowpoint you can clean
easily a drain ditch
cap and tough
part to clean.
HOW TO CLEAN
Pressure Weight
Cleaning Pin
Attached on the
botton of the unit.
Soft steam cap
Assemble the vent
so that it fits into
the groove
perfectly.
Clean a drain ditch
cap with brush kit.
When using
cleaning pin, pull
out cleaning pin
and make it meet
at night angles.
Alien
Substance
After you attach the soft
steam cap to fit into the
groove, press 'A'part firmly
to assemble the soft steam
cap into the product.
Put in dew dish
surely, after
cleanning.
Only use for the
valve hole of the
pressure weight.