Hyundai HYEA5080 User Manual page 7

Check and follow the local regulations as to sound level and
hours of operations for power auger.
1.4.10.8 In general, operate power auger between 09:00 and 17:00 on week days
and 09:00 to 17:00 weekends. Avoid using power auger late at night
and/or early in the morning.
1.4.10.9 Things to be careful about when using your power auger.
1.4.10.9.1 When using your power auger, grip the handles of the power
auger firmly with both hands, place your feet slightly apart
(slightly further apart than the width of your shoulders) so that
your weight is distributed evenly across both legs, and always be
sure to maintain a steady, even posture while working.
1.4.10.9.2 Maintain the speed of the engine at the level required to perform
drilling work, and never raise the speed of the engine above the
level necessary.
1.4.10.9.3 Always be sure never to allow other persons to come within the
work area while drilling.
1.4.10.9.4 Be especially careful not to slip if it is raining or if rain has
just stopped, as the ground is likely to be slippery at such
times.
1.4.10.9.5 If the grass or other object gets caught in the drill during
operation, always be sure to turn off the engine before
removing the object.
1.4.10.9.6 Guard against hazardous situations at all times. Warn adults to
keep pets and children away from the area. Establish a safe
method for gaining your attention during operation. Be careful if
you are approached.
1.4.10.9.7 If someone calls out or otherwise interrupts you while working,
always be sure to turn off the engine before turning around.
1.4.10.9.8 Keep operation area clear of all persons, particularly small
children and pets.
1.4.10.9.9 Never touch the spark plug or plug cord while
the engine is in operation. Doing so may result in
being subjected to an electrical shock.
1.4.10.9.10 Never touch the muffler, spark plug, or other
metallic parts of the engine while the engine is in
operation or immediately after shutting down the
engine. These metallic parts reach high
temperatures during operation and doing so could
result in serious burns.
1.4.10.9.11 When you finish drilling in one location and wish to continue work
in another spot, turn off the engine before carrying it to the new
location.
Page 7