Important Safety Instructions - NAD L55 Owner's Manual

Introduction

IMPORTANT SAFETY INSTRUCTIONS

GB
4
CAUTION
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL
AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1 Read owner's manual - After unpacking this product, read the owner's manual carefully and follow
all the operating and other instructions.
2 Power Sources - This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply in your home, consult your product
dealer or local power company. For products intended to operate from battery power or other sources,
refer to the operating instructions.
3 Grounding or Polarization - This product is equipped with a polarized alternating current line plug
(a plug having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
4 Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves
or other products (including amplifiers) that produce heat.
5 Water and Moisture - Do not use this product near water-for example, near a bath tub, wash bowl,
kitchen sink. or laundry tub; in a wet basement; or near a swimming pool and the like.
6 Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
7 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, playing particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
8 Overloading - Do not overload wall outlets, extension cords or integral convenience receptacles as this
can result in a risk of fire or electric shock.
9 Lightning - For added protection of this product during storms, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
10 Object and Liquid Entry - Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the product.
11 Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.