Page 4
WARNING: Some dust and debris created by the use of this tool could contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: * chemicals in fertilizers * compounds in insecticides, herbicides and pesticides * arsenic and chromium from chemically treated lumber.
HANDLE KNOBS UPPER HANDLE LOWER HANDLE Adjust the blade to the highest position. Insert lower handle into sockets at the rear of the deck. Secure lower handle to the deck with knobs. Connect upper handle to lower handle with handle knobs on both sides.
Figure 13. HUBCAP SCREW GASKET screw and gasket Remove the from the wheel axle, then remove the wheel. screw and gasket Replace with new wheel and use new secure. WHEEL WHEEL AXLE Figure 14. Fig. 13 Fully loosen the knobs at both sides of the deck and remove lower handle from the sockets.