Playback; Volume Control - Technika 26-622 User Manual

PLAYBACK

MPEG4
DVD SVCD
1. Power on and switch signal source to DVD mode and the unit begins to work.
2. Place the disc (with label side facing user) to the door and the unit will draw in the disc
automatically.
The unit begins to read disc information.
3. Press [PLAY] button to begin playing disc.
When the unit is playing a disc, press[
press [ ] button again and the unit resumes playback.
4. Press [STOP] button to stop playing.
When the unit is playing a disc, press [
while press [
At the pre-stop state, if you press [
At the stop state, if you press [
Press [ ] button when playing MPEG4 discs and the unit enters stop state directly.
5. Press [ ] button to take out disc.
6. When finishing playing, switch signal source to other working state and press [
button to make the unit enter standby state. Please pull out the power plug from power
socket when not using the unit for a long time.
[ ] button is effective only when selecting DVD signal source. In other signal source ,such as TV,
AV, etc, this button is invalid.

VOLUME CONTROL

DVD MPEG4 SVCD
1. Press [VOL+/VOL-] buttons to adjust volume.
2. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.
26" HD Ready LCD/DVD TV with USB Record
VCD CD
] button again and the unit enters stop state.
] button, the unit will play from the beginning point of the disc.
VCD CD
] button the first time and the unit enters pause state, while
] button the first time and the unit enters pre-stop state,
] button, the unit will continue to play from the stopped point.
User Guide
DVD Operation
]
41