Technika 26-622 User Manual page 31

The VGA mode supported up to 1366X768@75Hz(for 26"), you can use this unit as a
multimedia PC monitor. When this unit works in VGA mode, the following setup can
be done.
Press [SETUP] button to enter main section. Press [
press [ ] button or [OK] button to enter. If all is complete, please press [SETUP] button twice to
exit and your setup data will be saved automatically.
V G A S E T T I N G
Select VGA SETTING item to adjust such
parameters as Contrast, Brightness,
H-offset, V-offset, Frequency, Phase,
Auto Adjust.
NOTE
When your PC goes into standby mode, the screen will show
as right side. This unit will go into sleep mode if no signal
input for 5 minutes. In this mode, the indicator will remain
green, and the screen will turn off. You can wake it up by
waking up your PC.
S O U N D
Select SOUND item to adjust sound parameters.
You may adjust Sound Mode, Treble, Bass,
Balance, Auto Volume and Surround Sound.
Sound Mode item can be changed between
Music, Film, News, User.
Auto Volume item enables you to adjust Off or On
for controlling volume automatically.
Surround Sound item enables you to select Off or
On for surround sound.
26" HD Ready LCD/DVD TV with USB Record
] button to select sections and then
VGA SETTING
Select
SOUND
Select
User Guide
VGA Menu Setup
Contrast
Brightness
H-Offset
V-Offset
Frequency
Phase
Auto Adjust
Enter Return
SETUP
OK
VGA
NO SIGNAL
1 : 50
Sound Mode User
Treble
Bass
Balance
Auto Volume Off
SurroundSound Off
Adjust Return
SETUP
75
50
50
50
0
60
75
50
50
31