Technika 26-622 User Manual page 10

WARNING! ENSURE THE TV AND
ALL ANCILLARY EQUIPMENT IS
UNPLUGGED FROM THE MAINS
BEFORE MAKING ANY CONNECTIONS!
Connecting the TV antenna
Connect the TV antenna to the aerial socket
with a 75 ohm co-axial plug. For best results
use a high gain TV aerial, preferably roof or
loft mounted.
• To improve picture quality in a poor signal
area, purchase and install a signal amplifier.
• If the antenna needs to be split for two
TV's, use a 2-Way Signal Splitter
(not supplied).
Connecting external devices
Note: The TV will connect through
the HDMI cable by default. Only use
the HDMI cable and one other option.
Connecting more than one option
may cause interference.
HDMI lead
You can connect this TV to a compatible
device using a HDMI lead. This method will
give the best picture.
Connect the cable from the HDMI equipment
to the TV HDMI socket.
SCART lead
You can connect this TV to a compatible
device using a SCART lead. The connection
uses component video signals, i.e. the red,
green and blue (RGB) content of the video are
sent on separate signals.
10
VGA cable
You can use your TV as a monitor for your
personal computer by using a VGA cable.
Sound from your personal computer may also
be played through the TV. This requires the
audio output of the personal computer to be
connected to the AUDIO IN connection of the
TV.
Component Input
(Y/Pb/Pr cables)
You can connect this TV to a compatible
device using Y/Pb/Pr cables. Connect
the red, green and blue outputs to
the matching coloured inputs on the
compatible device. An additional audio
input is required.
USB connector
This product has a USB 2.0 interface;
you can play music, movie and picture
files from USB equipment. USB refers
to Universal Serial Bus. Most of the USB
devices on the market are USB 1.1 or
USB 2.0. There are some types USB 1.1
devices:
Monitors Communication devices, Audio,
Human Input Device (HID), Mass storage,
Most flash memory, USB HDD etc.
Belongs to Mass Storage Class.
Mass Storage Class includes 2 transport
manners:
1. USB 1.1 Mass Storage Class
Control/Bulk/Interrupt (CBI) Transport
2. USB 1.1 Mass Storage Class
Bulk-Only Transport. This unit supports
USB 1.1 Mass Storage Class Bulk-Only
Transport, we are not sure that other USB
devices can be supported! So please
find out about the features of USB
equipments before using it.
26" HD Ready LCD/DVD TV with USB Record
Connecting the TV
User Guide