Specifications; Windows Driver Installation - BIXOLON SRP-350 Installation Manual

• Table 1 – Baud rate (bps) selection
Transmission Speed 1-6
2400 ON
4800 ON
9600 OFF
19200 OFF
38400 OFF
57600 OFF
115200 ON
• Table 2 – Printing density selection
Printing density 2-5
Level 1 OFF
Level 2 ON
Level 3 OFF
Level 4 ON
◈ Self-Test
1. Check whether paper is mounted correctly.
2. Turn on the power while holding down the Feed button and the self-test procedure will
begin.
3. Printer will print out the current status of printer including the version of ROM and DIP
switch settings.
4. After printing out the current status of printer, the printer will print following lines and
waits for the next step (paper lamp will keep blinking).
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON.
5. Press the Feed button to continue printing, and the printer will print a form using the
character sets that can be printed.
6. The self-test ends automatically and the printer cuts the paper after printing the following
line.
*** COMPLETED ***
7. The printer is ready to receive data for normal operation upon completion of self-test
operation.
※ Note
You can check whether printer works correctly or not through the self-test. Printing quality,
ROM version, and DIP switch settings can be checked through the self-test function.

◈ Specifications

Item
Printing Method
Dot Density
Printing Width
Number of characters per
line (default value)
Printing Speed *1)
Receive Buffer Size
Printer
SMPS Input Voltage
Frequency
SMPS Output Voltage
Temperature
Humidity
Lifespan of Printer Head *2)
Auto Cutter Lifespan
Printer Mechanism MCBF *2)
Paper Type
Width of Roll Paper
Diameter of Roll Paper
Paper
Thickness of Paper
Paper Role Core Dimension
※ Note
*1) Printing speed may become slower depending on the baud rate and combination of
commands.
*2) The specifications were determined based on operation at normal temperature using
designated paper on default settings. They are subject to change depending on
temperature or printing level.
◈ Serial (RS-232C) Fixed Interface Model

Windows Driver Installation

1. Run Windows Driver installation file.
2. Select the [Next] button from the first installation window.
3. Select one of Serial Port in the Port Type window, and select the [Next] button.
1-7 1-8
OFF OFF
OFF ON
ON OFF
OFF OFF
ON ON
OFF ON
ON ON
2-6 Default
OFF
OFF
- Level 1 is Default
ON - Level 4 is Darkest
ON
Description
Thermal transfer printing
SRP-350plusIII: 180 dpi (7dots/mm)
SRP-352plusIII: 203 dpi (8dots/mm)
72 mm
SRP-350plusIII
: 42 (Font A), 56 (Font B), 56 (Font C)
SRP-352plusIII
: 48 (Font A), 64 (Font B), 64 (Font C)
SRP-350plusIII: Max. 300 mm/sec
SRP-352plusIII: Max. 270 mm/sec
4K Byte
100~240 VAC
50/60 Hz
24 VDC
0~45 ℃ (Operating)
-20~60 ℃ (Storage)
10~80 % RH (Operating)
10~90 % RH (Storage)
Paper is not included
150 Km
1,800,000 cuts
70,000,000 line
Roll Paper
79.5±0.5 mm
Up to Ø 83 mm
0.062~0.075 mm
Inner diameter: Ø12 mm (0.47")
Outer diameter: Ø18 mm (0.71")
(Fig 1)
4. Select [Yes] and reboot the computer.
Default
9600
5. After rebooting the computer, move to the following path to check the properties of the
installed printer.
※ Windows XP: Control Panel > Printer and Fax > BIXOLON SRP-350plusIII icon
> Right mouse button > select Properties.
※ Windows Vista or later version: Control Panel > Hardware and Sound > Devices
and Printers > BIXOLON SRP-350plusIII icon > Right mouse button > select
Printer Properties.
6. Select the [Port] tab from the Properties window, select Port Settings, and set all
parameters based on those obtained from the self-test, and select the [OK] button.
◈ Parallel (IEEE1284) Fixed Interface Model Windows Driver Installation
1. Run Windows Driver installation file.
2. Select the [Next] button from the first installation window.
3. Select one Parallel Port from the Port Type window and select the [Next] button. (Refer to
Fig 1)
4. Select the [Yes] button and reboot the computer. (Refer to Fig 2)
5. After rebooting the computer, move to the following path to check the properties of the
installed printer.
※ Windows XP: Control Panel > Printer and Fax > BIXOLON SRP-350plusIII icon
> Right mouse button > select Properties.
※ Windows Vista or later version: Control Panel > Hardware and Sound > Devices
and Printers > BIXOLON SRP-350plusIII Icon > Right mouse button > select
Printer Properties.
6. Select the [General] tab from the Properties window, select [Print Test Page], and check
whether test page is printed correctly.
◈ USB & Powered USB Interface Model Windows Driver Installation
1. Run Windows Driver installation file.
2. Select the [Next] from the first installation window.
3. Select USB from the Port Type window and select the [Next] button. (Refer to Fig 1)
4. Turn the printer power off and on, and click the [OK] button.
5. After rebooting the computer, move to the following path to check the properties of the
installed printer.
※ Windows XP: Control Panel > Printer and Fax > BIXOLON SRP-350plusIII icon
> Right mouse button > select Properties.
※ Windows Vista or later version: Control Panel > Hardware and Sound > Devices
and Printers > BIXOLON SRP-350plusIII Icon > Right mouse button > select
Printer Properties.
6. Select the [General] tab from the Properties window, select [Print Test Page], and check
whether test page is printed correctly.
※ Note
1) Please visit www.powered.org for more details on powered USB cable and connector.
2) Do not apply SMPS 24V when using powered USB.
(Powered USB uses its own power.)
3) USB communication is not available when using powered USB.
◈ Ethernet Interface Model Windows Driver Installation
Refer to the Ethernet Communication User's Manual. (Refer to CD)
◈ WEEE(Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial wastes for
disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) 7th~8th FL, Miraeasset Venture Tower, 685, Sampyeong-dong, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400, Korea
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
● Europe Office
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
(Fig 2)