Specifications; Before Assembly - Bowflex Max Trainer M7 Owner's/Assembly Manual

Specifications / Before Assembly
62.9"
(159.8 cm)
46.1"
(117 cm)
This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproduc-
tive harm. This Notice is provided in accordance with California's Proposition 65. If you would like additional information, please refer to our
website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a
workout area of a minimum 73" (185.4 cm) x 94.1" (239 cm). Be sure that the workout space you are utilizing has adequate height clearance, taking
into consideration the height of the user and the maximum pedal height of the fitness machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
Machine Mat
The Bowflex Max Trainer™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your
floor. The rubber machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If pos-
sible, put your Bowflex Max Trainer™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, go to: www.bowflex.com, or call 1 (800) 605–3369.
Maximum User Weight:
Maximum Pedal Height:
Power Requirements:
Operational Voltage:
Operating Current:
Machine Weight:
Regulatory Approvals:
A C Power Adapter:
25"
Connectivity:
(63.5 cm)
Assembly / Owner's Manual
300 lbs. (136 kg)
19.1 inches ( 48.5 cm)
9VDC
1500 mA
approximately 148 lbs. (67.1 kg)
U L listed, CSA certified (or equivalent), Rated 120V 60Hz
Input, 9VDC, 1500mA Output. Class 2 or LPS.
6