NETGEAR Nighthawk X8 5 User Manual page 77

A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
The VLAN / Bridge Settings page displays.
5. Select the Enable VLAN/Bridge Group check box.
The page expands.
6. Select the By bridge group radio button.
7. Select a Wired Ports check box or a Wireless check box:
• If your device is connected to an Ethernet port on the router, select the Wired Ports check box that corresponds
to the Ethernet port on the router to which the device is connected.
• If your device is connected to your router's WiFi network, select the Wireless check box that corresponds to
the router's WiFi network to which the device is connected.
Note You must select at least one Wired Ports or Wireless check box. You can select more than
one check box.
8. Click the Apply button.
Your settings are saved.
Nighthawk X8 AC5300 Tri-Band WiFi Router
Network Settings
77