NETGEAR Nighthawk X8 5 User Manual page 62

Network Settings
The router comes ready for WiFi, Ethernet, and USB connections. You can customize the router's network settings. We
recommend that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings
• Set Up a Default DMZ Server
• Ethernet Port Aggregation
• Change the LAN TCP/IP Settings
• Change the Router's Device Name
• Specify the IP Addresses That the Router Assigns
• Disable the DHCP Server Feature in the Router
• Manage Reserved LAN IP Addresses
• Custom Static Routes
• Set Up a Bridge for a Port Group or VLAN Tag Group
• Use the WPS Wizard for WiFi Connections
• Specify Basic WiFi Settings
• Set Up a Guest WiFi Network
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Specify WPS Settings
• Use the Router as a WiFi Access Point
• Use the Router in Bridge Mode
on page 63
on page 64
on page 65
on page 67
on page 69
on page 71
on page 73
on page 80
on page 80
on page 84
on page 86
on page 87
on page 88
on page 89
on page 91
on page 69
on page 71
on page 76
62
6