Modifying A Telephone Number - Panasonic Sectlon 770 Technical Manual

Section 770 Voice Recognition Telephone
BAD TRAINING
PLEASE REPHRASE
YES
10:00 SAT JAN 10
-EXT100 100
Notes: • If you cannot catch the message spoken by Voice Guidance, say

Modifying a Telephone Number

This Chapter describes how to modify a telephone number stored in the
Phonebook.
Note: If you do not hear Voice Guidance in response to saying "Go Back,"
"Change," "List," "Yes," "No," "Number," "Back Space," or "Complete,"
Press the Soft Key [EXEC] or Soft Key [END] next to the characters on the
screen.
18
10. If the tone used in step 8 differs from that used in step 9
The following message is displayed and Voice Guidance
responds with "Try again." Repeat the procedure from step 7.
• If the recorded name sounds similar to an existing entry
The following message is displayed and Voice Guidance
responds with "'Existing name' Conflict. Try again." Say "Yes"
to return to step 7. Change the entry using a different name.
11. Replace the handset.
"Repeat" to repeat the message.
• To abort the procedure at any point before step 9, simply replace the
handset.
• You can say "Cancel" (or press the Cancel Key) at any point to
display the TOP MENU, allowing you to store new entries or edit or
delete existing entries. This function can be useful if you want to
check the contents of the Phonebook or place a call while changing
the contents of the Phonebook.
• If you do not speak or press any keys for three minutes, the Voice
Recognition Mode is ended.
1. Lift the handset and listen for the dial tone.
(USA) issued April 2000
Chapter 3. Modifying a Phonebook Entry
DBS/824-770