Advertisement
BEFORE YOU BEGIN
Adult assembly required. Remove contents from box. Inspect the contents for scratches in the paint and/or dents that
may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
Hobby Horse
T-bar
Plastic Cover
Front Wheels
Required Tool
4 mm Allen wrench
with cross-head
(Included)
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Grips
Rigid Rear Fender
(Not a brake)
Deck
1.
Rear Wheel
2
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR RAZOR JR SCOOTER.
Razor Jr scooters have been
built to certain Razor design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame and
all other parts. Certain aftermarket
products may not be compatible
and will void the warranty.
Product ID Locations:
See locations to the left
1. Deck (underneath unit)
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Screws
• Axle Bolt
• Allen Wrench
• Owner's Manual
Advertisement
