Helpful Hints - Mustek GSmart 350 User Manual

Helpful Hints

Issue Cause
No power. 1. Batteries not loaded correctly.
2. Dead batteries.
Sudden power 1. Low battery power.
failure. 2. Auto Power Off function
engaged.
1. Camera not in View mode.
No capture when 2. BUSY icon appears.
shutter is depressed. 3. Memory is full.
4. Flash is charging.
Flash does not work. 1. Flash is set to OFF.
2. USB is connected to the camera.
3. Environment is bright enough.
Image is too bright 1.Exposure(EXP) setting is
Or too dark. unsuitable.
1. Camera is not powered on.
Device not ready 2. USB not connected properly.
Or 3. USB data transfer error.
Connection failure. 4. Hardware compatibility problem.
5. Insufficient USB power
1. Incorrect cable connection.
Cannot transfer data. 2. Camera is not turned on.
CF Card error. 1. CF Card may not be formatted.
Solution
1. Re-install batteries.
2. Replace batteries.
1. Replace batteries.
2. Turn Power On.
1. Set camera to View mode.
2. Wait for camera to re-adjust.
3. Delete images in camera's memory.
4. Wait for flash icon to stop blinking on OSD.
1. Set flash to AUTO in RECORD of OSD.
2. Disconnect the USB cable.
3. Continue capturing images.
1. Adjust EXP(exposure) setting while capturing
images with up/down arrows Or change EXP
setting in RECORD category of OSD.
1. Power on the camera.
2. Ensure USB cable is connected.
3. Unplug and reconnect the USB cable.
4. Contact your computer vendor for help.
5. Ensure USB connects directly to computer
host port, NOT keyboard or other port.
1. Reconnect the cables.
2. Turn on the camera.
11
1. Format card through the OSD function.
Note: You will delete all data on the CF Card if
you reformat your CF Card.
10