Troubleshooting/Q&A - Panasonic TY-EW3D10U Operating Instructions Manual

Troubleshooting/Q&A
Images are not 3D.
The power of the
3D Eyewear turns off
by itself.
There is something
wrong with the 3D
images.
The indicator lamp
does not light when
switching on the
power.
10 - ENGLISH
Are the image settings switched to 3D images?
Some 3D image signals are not automatically
recognized as 3D images.
Set "3D Eyewear" to "On".
For details, see the television operating
instructions.
Is there a sticker or other such item blocking
the infra-red reception section on the
3D Eyewear?
If the eyewear stops receiving infra-red signal from
the television, the power automatically switches off
after 5 minutes.
Check that there are no objects blocking the path
between the television and 3D Eyewear.
Individual differences may occur in which the
3D images are difficult to see, or cannot be
seen, especially in users that have a different
level of eyesight between the left and right
eyes.
Take the necessary steps (wearing glasses etc.) to
correct your eyesight before use.
Are there any objects between the eyewear and
television?
Is there a sticker or other such item blocking
the infra-red reception section on the
3D Eyewear?
If the eyewear stops receiving infra-red signal from
the television, the power automatically switches off
after 5 minutes.
Check that there are no objects blocking the path
between the television and 3D Eyewear.
Are the left and right sides of the 3D image
reversed?
Switch the left and right sides of the 3D image.
For details, see the television operating
instructions.
The battery is too low to operate the
3D Eyewear.
The indicator lamp does not light when switching
on the power by pressing on the power by pressing
and hold the power button for 1 second; that
indicates the battery is completely flat. Replace the
battery with new one.