Testing; Test Sessions - netest Powertimer SW-300 User Manual

3

3 TESTING

TESTING
This chapter assumes that Test Groups and Subjects have been
created with the Powertimer Analyzer software and that they
have been transferred to the Powertimer SW-300. Also this as-
sumes that each subject that is tested has a valid birth date,
height and weight since tests cannot be started without those.
If subjects or groups do not exist or the subject data is not val-
id, chapter 6 explains how to create Test Groups and a Sub-
jects using Powertimer SW-300.

3.1 Test sessions

When the Powertimer SW-300 is started the Main View is
shown. To start testing, you must first create a Test Session.
Sessions are used to group several tests results into one unit
for easier result browsing and have the properties defined in
chapter 1.1.
To start testing, tap on the Sessions button in the Main View.
This enters the Session Manager shown in Figure 14.
Figure 14 Session Manager
To create a new test session, select the Add New Session ac-
tion from the action selector of Session Manager and tap on
the Do Action button. This enters the Edit Session view shown
in Figure 15.